Minggu, 21 Agustus 2016

Default Static Routing di Cisco Packet Tracer

           No comments   

DEFAULT STATIC ROUTING DI CISCO PACKET TRACER
Hello,welcome back to my blog
disini gua akan ngasih tau cara mengkonfigurasi Default Static Routing  di Cisco Packet Tracer *Boomm

contoh:


DEFAULT STATIC ROUTING 
(Cisco Packet Tracer)

Pemberian IP address, Subnet mask, Gateway

1. Pemberian Ip Address dan Subnet Mask pada Fa0/0 , Fa0/1 , Lo1 , Lo2 di Route0
  • klik route0, klik CLI
  • pilih no

Router(config)#interface FastEthernet0/0

Router(config-if)#no shutdown

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)# ip address 192.168.1.254 255.255.255.0

Router(config-if)#exit

Router(config)#interface FastEthernet0/1

Router(config-if)#no shutdown

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#ip address 12.12.12.2 255.255.255.0

Router(config)#int Lo1

Router(config-if)#

%LINK-5-CHANGED: Interface Loopback1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback1, changed state to up

Router(config-if)#ip address 172.16.1.1 255.255.255.0

Router(config-if)#int Lo2

Router(config-if)#


%LINK-5-CHANGED: Interface Loopback2, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback2, changed state to up

Router(config-if)#ip address 172.16.2.2 255.255.255.0
2. Pemberian Ip address dan Subnet mask pada Fa0/0, Fa0/1, Lo3, Lo4, di Route 1
  • klik route1, Klik CLI
  • pilih no

Router(config)#interface FastEthernet0/0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
ip address 192.168.2.254 255.255.255.0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface FastEthernet0/1
Router(config-if)#
Router(config-if)#exit
Router(config)#interface FastEthernet0/1
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
ip address 12.12.12.2 255.0.0.0
Router(config-if)#ip address 12.12.12.2 255.255.255.0
Router(config-if)#int Lo3
Router(config-if)#
%LINK-5-CHANGED: Interface Loopback3, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback3, changed state to up
Router(config-if)#ip address 172.16.3.3 255.255.255.0
Router(config-if)#int Lo4
Router(config-if)#
%LINK-5-CHANGED: Interface Loopback4, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback4, changed state to up
Router(config-if)#ip address 172.16.4.4 255.255.255.0

3. Pemberian IP,Subnet,Gateway pada Laptop 0
    contoh :

4. Pemberian IP, Subnet, Gateway Laptop 1
    contoh:
 
Setting static default route di Ruote0

Pilih salah satu:

Router(config)#ip route 0.0.0.0 0.0.0.0 12.12.12.2

atau
Router(config)#ip route 0.0.0.0 0.0.0.0 fa0/1

Setting static default route di Ruote1
Pilih salah satu:
Router(config)#ip route 0.0.0.0 0.0.0.0 12.12.12.1
atau
Router(config)#ip route 0.0.0.0 0.0.0.0 fa0/1

Verifikasi PING laptop 0 ke 1
contoh :

Verifikasi PING laptop 1 ke 0
contoh :
 
Terima kasih, semoga bermanfaat maap kalo ada kesalahan ya namanya cowo *boom
tunggu postingan gua selanjutnya bye *boom

0 komentar:

Posting Komentar